What Refrigerant Does Your Lexington AC Use and Why It Matters
R-22 vs. R-410A vs. R-454B refrigerant explained for Lexington homeowners. Learn which type your AC uses, why it matters for repairs, and when to upgrade your system.

Your air conditioner's refrigerant type determines repair costs, part availability, and whether your system meets current environmental standards. If your Lexington home still runs an AC with R-22 (Freon), you are operating on borrowed time. That refrigerant has not been manufactured in the U.S. since 2020, and the cost of reclaimed supply keeps climbing every year.
Not sure what your system uses? Schedule an AC inspection and our technicians will check your refrigerant type, charge level, and overall system health in one visit.
The three refrigerants you will encounter
Central Kentucky homes currently have systems running one of three refrigerants. Each has different properties, costs, and long-term implications for your wallet.
- R-22 (Freon): Phased out in 2020. Found in systems manufactured before 2010. Repair costs are high because refrigerant supply is limited to reclaimed stock.
- R-410A (Puron): The standard refrigerant in systems installed between roughly 2010 and 2024. Widely available and affordable for repairs today.
- R-454B (Opteon XL41): The next-generation replacement for R-410A with a significantly lower global warming potential. Required in new equipment starting in 2025.
Why R-22 is a problem for Lexington homeowners
If your AC was installed before 2010, it almost certainly uses R-22. Every time your system develops a leak and needs a recharge, you are paying premium prices for a shrinking supply.
Beyond cost, R-22 systems are typically 15+ years old. Compressors, contactors, and capacitors are all at end-of-life. Spending hundreds on refrigerant for a system that may need a compressor replacement next summer is not a sound investment.
R-410A: the current workhorse
R-410A has been the standard residential refrigerant for over a decade. It operates at higher pressures than R-22, which means better heat transfer and higher efficiency ratings. Most 14 to 20 SEER systems in Lexington homes run on R-410A.
Parts and refrigerant are readily available and affordable. If your R-410A system is less than 10 years old, repairs are straightforward and cost-effective. There is no urgency to replace a well-maintained R-410A system.
R-454B: what is changing in 2025 and beyond
The EPA's AIM Act requires new AC equipment to use refrigerants with lower global warming potential. R-454B is the primary replacement for R-410A in residential systems. It is mildly flammable (A2L classification), which means updated safety standards for installation but no practical risk to homeowners during normal operation.
You do not need to replace an existing R-410A system to switch to R-454B. The transition only applies to newly manufactured equipment. R-410A will remain available for service and repairs for many years.
How to check your refrigerant type
Walk outside to your condenser unit and look for the data plate, usually a metal label on the side or back of the cabinet. The refrigerant type is listed alongside the model number, serial number, and electrical specifications. Look for a line that reads Refrigerant or Charge followed by R-22, R-410A, or R-454B.
If the label is faded, corroded, or missing, your HVAC technician can identify the refrigerant during a routine service call. This is included in every Cool and Cozy Club maintenance visit.
When to repair vs. replace based on refrigerant
Refrigerant type is one of the clearest decision points when weighing repair against replacement. Here is how we advise Lexington homeowners:
- R-22 system with a refrigerant leak: Replace the system. Recharging is too expensive and the equipment is past its expected lifespan.
- R-410A system under 10 years old: Repair. Parts and refrigerant are affordable and available.
- R-410A system over 12 years old with a major failure: Evaluate replacement. You will get a more efficient R-454B system with a full warranty.
- Any system with a cracked heat exchanger or failed compressor: Replace regardless of refrigerant type.
Refrigerant leaks and what causes them
Refrigerant does not get used up like gasoline. If your system is low on charge, there is a leak somewhere. Common leak points include the evaporator coil, service valve connections, and the line set running between your indoor and outdoor units. Central Kentucky's freeze-thaw cycles put stress on copper fittings and contribute to leaks over time.
If you suspect a refrigerant leak, schedule an AC repair before running the system. Operating an AC with low refrigerant damages the compressor and turns a repairable problem into a full replacement.
What this means for your next AC purchase
If you are shopping for a new air conditioner in Lexington, you will likely be choosing between remaining R-410A inventory and newer R-454B models. Both are solid options. R-454B equipment may carry a slight price premium in 2026 as manufacturers ramp up production, but the long-term availability of R-454B makes it the safer bet for a system you will own for 15 to 20 years.
We install American Standard systems in both refrigerant types. Request a free AC estimate and we will walk you through the options for your home and budget. Financing is available to spread the cost of a new system.
Lexington homeowners: know your refrigerant
Understanding your refrigerant type takes five minutes and can save you hundreds or thousands on your next repair decision. Check your data plate, know where your system stands, and plan ahead rather than reacting to a breakdown on the hottest day of July.
Call us at 859-457-0426 or schedule service online. We serve Lexington, Nicholasville, Georgetown, Winchester, and all of Central Kentucky with licensed, insured HVAC service.
Frequently Asked Questions
- Is R-22 refrigerant still available in Lexington, KY?
- R-22 production and import ended in the United States on January 1, 2020. If your Lexington AC still uses R-22, replacing the system is usually more cost-effective than repeated recharges.
- What refrigerant does a new AC system use in 2026?
- New AC systems sold in 2026 use either R-410A or the newer R-454B refrigerant. R-454B has a lower global warming potential and is replacing R-410A as the industry standard. Both work well in Central Kentucky's climate.
- Can I switch my AC from R-22 to R-410A without replacing the whole system?
- No. R-22 and R-410A operate at different pressures and require different compressors, coils, and line sets. A full system replacement is required to switch refrigerant types. Drop-in substitutes exist but often void warranties and reduce efficiency.
- How do I find out what refrigerant my AC uses?
- Check the data plate on your outdoor condenser unit. It lists the refrigerant type, usually labeled as R-22, R-410A, or R-454B. If the label is unreadable, any licensed HVAC technician can identify it during a service call.
Schedule AC service in Lexington
Licensed, veteran-owned technicians serving Lexington and Central Kentucky — free estimates, no pressure.
Learn moreHave questions about your home?
Talk to a licensed Lexington technician — no pressure, just answers.


